Series 1000 Speed Reducer

Series 1000 Speed Reducer Features

• Gear Case

  Made of high strength cast iron. Completely sealed for oil enclosed operation and to keep dirt out.

• Worm Shaft

  One piece alloy steel hardened and ground to insure long service. The hydraulic motor couples direct to the shaft.

• Worm Gear

  High tensile aluminum-nickel alloy bronze . Optimum lead and pressure angles transmit maximum power to the drum.

• Gear Ratio

  20:1 standard, optional 10:1, 27:1 and 40:1 ratios provide optimum efficiency in power and speed.

• Bearings

  Worm gear and worm shaft run on tapered roller bearings in an oil enclosed gear case.

• Output Shaft

  1-1/2” diameter heat -treated alloy steel minimum tensile strength 150,000 psi.

• Motor Mount

  SAE (A) 2 bolt flange. 1” woodruff keyed motor shaft. Motor is directly coupled into worm shaft. No separate coupling required.

• Brake (1000K SR)

  Spring applied hydraulic release brake automatically holds load when hydraulic pressure is released.

• Motor-Brake

  DUET-SAFE® Double Action Braking System combines a powerful spring applied, hydraulic released motor-brake with a double counter balance brake valve to automatically hold loads when hydraulic pressure is released and control speed during lowering operations. Winch is ideal for high-speed pulling applications or wherever load holding is critical.

• Models

  10-A-SR , 10-B-SR , 10-C-SR , 10-DD-SR , 10-E-SR , 10-G-SR , 10-4.9-SR , 10-6.2-SR , 10-8.0-SR , 10-9.6-SR , 10-11.9-SR , 10H-3.0T-SR , 10H-6.2T-SR , 10H-9.6T-SR , 10K-AM-SR , 10K-BM-SR , 10K-4.9M-SR , 10K-6.2M-SR , 10K-8.0M-SR , 10K-9.6M-SR , 10K-11.9M-SR