Home Bloom Manufacturing Incorporated
About Bloom Manufacturing Contact Bloom Manufacturing Locate Bloom Manufacturing
Home Bloom Manufacturing Incorporated - 1443 220th St. - Independence, Iowa - (800) 394-1139 Bloom Manufacturing Incorporated
Choose Winch Solution By Industry Fishing & Marine Waste & Refuge Drilling Construction Utility & Electric

Power-Flite Grain Bin Loading & Unloading Augers

Vertical Bin Unloading Auger | Horizontal Bin Unloading Augers | Inclined Bin Unloading Augers | Roof Top Loading Augers  

Vertical Bin Unloading Augers

For unloading directly into truck, trailer, wagon or grinder · Available in 6" and 8" sizes

High efficiency force feed corner moves grain only a short distance between horizontal and vertical screws.  Gives more capacity with less horsepower

Includes: Horizontal screw, bin brackets, foot support, flex tube, 12" X 2 groove pulley, 2 belts and motor mount.  Does not include motor or motor puller.

Optional 45 degree inclined auger for PTO drive.  Same as vertical unloader except: 20' long auger comes with support stand and safety shear pin slip clutch. Does not include motor mount, pulley, belts, bin bracket or PTO shaft.

  • Heavy duty oil enclosed gearbox w/Timken roller bearings.

  • Hardened tooth sprockets.

  • 16' vertical auger - heavy 14 ga. tube.

  • 10 ga. auger flight stretched on high strength steel tube.

  • Weather cap keeps water out of top bearing.

  • Lifetime lubricated ball bearing throughout.

  • One drive for vertical and horizontal augers.

  • Clamps to under bin tube.

  • Recommended speed - 500 rpm
ˆ Back to Top

Horizontal Bin Unloading Augers

Trouble Free Performance · Available in 6", 8" and 10" sizes · 24" Long Head Section

POWER-FLITE UNLOADING AUGER SPECIFICATIONS

  • Auger Tube - 14ga. head section clamps to under bin tube.

  • Auger Screw - Flight stretched and welded to high strength steel tube
     - 6" - 1"      O.D. tube - 10 ga. LH Flight
     - 8" - 1-1/2" O.D. tube - 10 ga. LH Flight
     -10" - 1-7/8" O.D. tube -   7 ga. LH Flight

  • Maximum Bin Diameter
     - 6" up to 40' diameter
     - 8" up to 40' diameter
     - 10" up to 60' diameter

  • Bearings - Lifetime lubricated ball bearings on head end.

  • Recommended Speed - 500 RPM

  • Drive Includes
    - 12" x 2 groove cast iron pulley
    - 2 grip notch belts
    - motor mount and belt guard

  • Not Included - Motor pulley or motor
ˆ Back to Top

Inclined Bin Unloading Augers

  • Fixed 22 degree Inclined Auger - Use when additional height is required for discharge.
  • Auger screw welded over U-joint for high efficiency.
  • Bronze relubable center bearing to keep joint centered in tube.
  • Fast and Dependable
Auger Length Discharge Height
  5'   -   (Standard) 2'
10'   -   (Available) 4'
15'   -   (Available) 6'
20'   -   (Available) 8'
ˆ Back to Top

Roof Top Loading Augers

Power-Flite Roof-Top Auger permanently attaches to roof to accommodate shorter transport augers

Quality Power-Flite Auger Features:
* Heavy duty 14 ga. outer tube
* Extremely durable 3/16" thick flighting
* High strength steel center tube

UNITS INCLUDE

  • Mounting brackets

  • Support legs

  • 2' flex discharge spout

  • Motor mount and belt guard

  • 18" x 18" hopper with cover controlled from ground level

  • 12" diameter, 2 groove pulley and two belts

Auger Length HP CAP.(BU./HR.)
6" 12' 1-1/2   900
6" 16' 2   900
6" 20' 3   900
8" 12' 3 2350
8" 16' 5 2350
8" 20' 5 2350
Intermediate Well
For three control rods 		Intermediate Well
For two control rods 		Center Well
For one control rod

Center wells may be used singly or in combination with intermediate wells · For use in steel drying or concrete floors · Positive shut-off slide gate action (Units Do Not Include Motor or Motor Pulley)

Tube Cover
Keeps out rodents and weather.  Slips over end of tube.

Bin Wall Clamp Flange
Gives additional support to bin wall and auger.  Bolts to bin wall and clamps over tube.
ˆ Back to Top